Product Overview
The First Team Tempest Triumph-FL Portable Basketball System is built with heavy-gauge steel, including two 2”x 5” rectangular vertical uprights and a 4”x 4” square extension boom with ½” thick steel reinforcement, providing a 66” backboard-to-base extension. The all-steel base measures 48” across the front (52” with side pads) and is fortified with a ballast box designed for 720 lbs. of cement blocks plus 300# of pre-welded steel, contributing to an approximate system playing weight of 2000#. Mobility is facilitated by four large 8” non-marking wheels, while 8” diameter retractable foot pads provide stability during play.
The system features a Model FT235 backboard, constructed from 1/2” thick tempered glass with ceramic screening and an anodized aluminum frame, measuring approximately 72” wide and 42” high. Paired with this is the flexible “FULL-TILT” Model FT196 rim, an institutional quality 5/8” diameter ring with an 18” I.D. opening, finished in orange powder coat and designed to withstand dunking. Height adjustment is handled by a Spring-Assist system, enabling one-person operation to set the rim from 10’ down to 6’ in six-inch increments. The unit is padded with 2” thick foam, including 1 ½” for side and ballast box pads, and the entire unit is finished with a white powdercoat and backed by a Lifetime Superior Warranty.
Specifications
| Specification | Value |
|---|---|
| Vertical Uprights | Two, heavy gauge 2”x 5” rectangular tubing, each supported by two 2”x 2” square tubular braces |
| Extension Boom | Heavy gauge 4”x 4” square tubing with ½” thick steel reinforcement; direct rim mounting; two tubular braces support upper backboard corners |
| Base-to-Backboard Extension | 66” (rim at 10’ playing height) |
| Base Construction | All steel, primarily 3” x 1 ½” rectangular steel tubing; 48” front width (52” with side pads installed) |
| Ballast | Ballast box accepts (24) 4”x 8”x 16” solid cement blocks (720 lbs. total); 300# pre-welded steel ballast |
| Mobility | Four large 8” non-marking wheels; front rests on 8” diameter retractable, non-marking foot pads during play |
| Height Adjustment | Spring-Assist (seven 3 ½” painted coil springs), one-person operation; adjustable in six-inch increments from 10’ down to 6’ via removable pin |
| Padding | 2” thick foam (standard) on 7/16” wafer board with 14 oz reinforced vinyl laminate; 1 ½” thick foam for side pads and ballast box pad; secured with 2” velcro straps |
| Unit Finish | White powdercoat on entire unit; Rim is orange powder coated |
| Backboard | Model FT235, 1/2” thick tempered glass with bright white fire impregnated ceramic screening, approximately 72” wide and 42” high |
| Backboard Frame | Clear anodized aluminum “F” type extrusions |
| Rim / Goal | Model FT196, flexible “FULL-TILT” design, institutional quality, official 5/8” diameter ring, standard 18” I.D. opening, designed for dunking |
| Net | Heavy-duty nylon net |
| System Weight | Approximately 2000# (playing weight) |
| Warranty | Lifetime Superior Warranty |
| Pivot Points | High load, maintenance free bushings |
Compare OmniChamp models
|
FT86 Base Pad |
FT86-BP Boom Pad |
Triumph-ST THIS |
Triumph-FL |
Triumph |
|---|---|---|---|---|
Backboard — | Backboard FT235 1/2 in. tempered glass, approx. 72 in. x 42 in. | Backboard FT235 1/2 in. tempered glass, approx. 72 in. x 42 in. | Backboard FT235 1/2 in. tempered glass, approx. 72 in. x 42 in. | Backboard FT235 1/2 in. tempered glass, approx. 72 in. x 42 in. |
Backboard frame — | Backboard frame Clear anodized aluminum "F" type extrusions | Backboard frame Clear anodized aluminum "F" type extrusions | Backboard frame Clear anodized aluminum "F" type extrusions | Backboard frame Clear anodized aluminum "F" type extrusions |
Rim / goal — | Rim / goal FT196 FULL-TILT flex, 5/8 in. ring, 18 in. I.D., orange | Rim / goal FT196 FULL-TILT flex, 5/8 in. ring, 18 in. I.D., dunkable | Rim / goal FT196 FULL-TILT flex, 5/8 in. ring, 18 in. I.D., orange | Rim / goal FT196 FULL-TILT flex, 5/8 in. ring, 18 in. I.D., orange |
Base-to-backboard extension — | Base-to-backboard extension 66 in. (rim at 10 ft.) | Base-to-backboard extension 66 in. (rim at 10 ft.) | Base-to-backboard extension 66 in. (rim at 10 ft.) | Base-to-backboard extension 96 in. |
Uprights & boom — | Uprights & boom Two 2x5 in. uprights; 4x4 in. boom, 1/2 in. steel reinforcement | Uprights & boom Two 2x5 in. uprights; 4x4 in. boom, 1/2 in. steel reinforcement | Uprights & boom Two 2x5 in. uprights; 4x4 in. boom, 1/2 in. steel reinforcement | Uprights & boom Two 2x5 in. uprights; 4x4 in. boom, 1/2 in. steel reinforcement |
Height adjustment — | Height adjustment Spring-Assist, seven 3 1/2 in. springs; 10 ft. to 6 ft. | Height adjustment Spring-Assist, seven 3 1/2 in. springs; 10 ft. to 6 ft. | Height adjustment Spring-Assist, seven 3 1/2 in. springs; 10 ft. to 6 ft. | Height adjustment Spring-Assist, 10 ft. to 6 ft. in 6 in. increments, pin |
Base & ballast — | Base & ballast Steel 3x1 1/2 in. tubing, 48 in. front; 720 lbs. blocks + 300 lbs. steel | Base & ballast Steel 3x1 1/2 in. tubing, 48 in. front; 720 lbs. blocks + 300 lbs. steel | Base & ballast Steel 3x1 1/2 in. tubing, 48 in. front; 720 lbs. blocks + 300 lbs. steel | Base & ballast Steel 3x1 1/2 in. tubing, 48 in. front; 720 lbs. blocks + 300 lbs. steel |
Mobility / floor anchoring — | Mobility / floor anchoring Four 8 in. non-marking wheels; retractable 8 in. foot pads | Mobility / floor anchoring Four 8 in. non-marking wheels; retractable 8 in. foot pads | Mobility / floor anchoring Four 8 in. wheels, foot pads; optional sub-floor tie downs | Mobility / floor anchoring Four 8 in. non-marking wheels; retractable 8 in. foot pads |
Padding 2 in. foam (1 1/2 in. side/ballast), 14 oz vinyl, velcro straps | Padding 2 in. foam (1 1/2 in. side/ballast), 14 oz vinyl, velcro straps | Padding 2 in. foam (1 1/2 in. side/ballast), 14 oz vinyl, velcro straps | Padding 2 in. foam (1 1/2 in. side/ballast), 14 oz vinyl, velcro straps | Padding 2 in. foam (1 1/2 in. side/ballast), 14 oz vinyl, velcro straps |
Finish — | Finish White powdercoat on entire unit | Finish White powdercoat; orange powder coated rim | Finish White powdercoat; orange powder coated rim | Finish White powdercoat; orange powder coated rim |
Ship Weight | Ship Weight approximately 2000# | Ship Weight approximately 2000# | Ship Weight approximately 2000# | Ship Weight approximately 2000# |
Best for Facilities replacing or adding safety padding to an existing Tempest or Hurricane base. | Best for Owners needing a direct replacement boom pad for a Tempest or Hurricane system. | Best for Schools wanting a 66 in. extension portable glass system for standard court setups. | Best for Gyms that want the 66 in. portable system with optional sub-floor tie downs. | Best for Competition venues requiring the longest 96 in. extension for safe out-of-bounds clearance. |
| $2,353.00 $1,980.00 | $249.00 $212.00 | $10,931.00 | $10,931.00 | $11,413.00 $10,839.00 |
| Check › | Check › | Viewing | Check › | Check › |
Shipping & Returns
We offer standard 1-5 business day shipping (following dispatch) via LTL Freight, FedEx, UPS, DHL, or USPS. Orders typically process in 1-2 business days (starting the following business day). Shipping rates are usually calculated at checkout; however, we reserve the right to provide custom shipping quotes for oversized or specialized equipment.
60-DAY NO-HASSLE REFUNDS AND RETURNS
If there’s an issue with your product, we make refunds and returns quick and easy.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused or unused, with tags, and in its original packaging. To contact us, email info@joysportstore.com
More information on shipping and returns can be found here.
Warranty
Lifetime Superior Warranty
Every First Team product is backed by First Team's warranty program. This model carries the warranty noted above. Here is what First Team's warranty tiers cover:
- Limited Warranty - covers damage during normal, intended use. Excludes vandalism and deliberate damage. Normal wear from weathering or UV exposure is not covered; all painted items carry a 1-year limited warranty on coating.
- Superior Warranty - additionally covers any damage or failure caused by basketball activity or contact with the unit, including deliberate hanging on the rim. Vandalism excluded.
- Unconditional Warranty - the broadest tier: covers any damage or failure that occurs for any reason.
- Manufacturer's Defect - all products are warranted against manufacturer's defects at delivery.
Warranties apply to the original purchaser only and are non-transferable; coverage ends on resale or transfer. Residential-only products are not covered for non-residential use.