Product Overview
The N68FB carries the backboard on three pipe extension frames in high strength galvanized pipe, tied together with internal vertical and lateral bracing clamped to the structure. Frame pipes are cut in the field so the extension off the wall can be set anywhere within the specified range rather than at one fixed dimension.
At this extension the station is chain-supported. Dual high test zinc-plated steel safety chains run to the wall, terminated with a forged shackle and a turnbuckle so tension can be adjusted during installation. Jaypro mounts the chains to a dedicated wood stringer separate from the frame stringer and states that systems sharing a single stringer for both should not be approved as equals.
Wall attachment uses southern yellow pine stringers with routed edges and a clear lacquer finish, supplied pre-drilled and counterbored so brackets install without field layout. The goal mounts directly through the backboard into heavy-duty structural steel fittings, keeping rim loads off the bank. Wall height requirements depend on the chosen extension, and wall anchors are specified and supplied by others.
Specifications
| Specification | Value |
|---|---|
| Model | N68FB |
| Type | 3-Point stationary fan board wall mounted shooting station |
| Wall Offset (Face of Bank) | 6'-0" to 8'-0" |
| Backboard | 36" cast aluminum fan backboard (ALB-24BT) |
| Goal | Collegiate "Shot" breakaway goal (GBA-548) |
| Rim Height | 10'-0" AFF |
| Frame | Three (3) pipe extension frames, 1.90" O.D. high strength galvanized pipe |
| Bracing | Internal vertical and lateral bracing, 1.315" O.D. pipe |
| Support Chains | Dual 1/4" GR43 high strength zinc-plated steel safety chains |
| Chain Hardware | Forged shackle and 1/2" turnbuckle attachments |
| Chain Attachment | Wood stringer independent of the frame structure |
| Mounting Stringers | 2 x 8 southern yellow pine, routed edges, two coats clear lacquer |
| Stringer Prep | Supplied pre-drilled and counterbored for easy assembly |
| Wall Requirement | Existing structural wall (CMU block wall recommended) |
| Goal Mounting | Mounted directly through the backboard into heavy-duty structural steel fittings |
| Finish | Durable black powder coat on all structure and fittings |
| System Weight | 371 pounds |
| Anchors | Wall mounted anchors specified and supplied by others |
| Warranty | 25 Year Limited Warranty on structure |
| Manufacturer | Jaypro Sports, Waterford, CT USA |
| Ship Weight | 282 lbs |
| Ships Via | Freight truck (LTL) |
Compare Jaypro models
|
Fan 9 in.–2 ft. |
Fan 3.5–6 ft. |
Fan 8–10 ft. |
Glass 2–4 ft. |
Glass 6–8 ft. |
Glass 10–12 ft. |
|---|---|---|---|---|---|
Model N2FB | Model N366FB | Model N810FB | Model N24GB | Model N68GB | Model N1012GB |
Wall Offset (Face of Bank) 9" to 2'-0" | Wall Offset (Face of Bank) 3'-6" to 6'-0" | Wall Offset (Face of Bank) 8'-0" to 10'-0" | Wall Offset (Face of Bank) 2'-0" to 4'-0" | Wall Offset (Face of Bank) 6 ft. to 8 ft. | Wall Offset (Face of Bank) 10'-0" to 12'-0" |
Backboard 36" cast aluminum fan (ALB-24BT) | Backboard 36" cast aluminum fan (ALB-24BT) | Backboard 36" cast aluminum fan (ALB-24BT) | Backboard 42" x 72" glass (GBRUB-42) | Backboard Glass backboard | Backboard 42" x 72" glass (GBRUB-42) |
Goal Collegiate "Shot" breakaway (GBA-548) | Goal Collegiate "Shot" breakaway (GBA-548) | Goal Collegiate "Shot" breakaway (GBA-548) | Goal GBA-642 Revolution breakaway | Goal — | Goal GBA-642 Revolution breakaway |
Frame Structure (3) 1.90" galv. pipe frames; steel wall brackets | Frame Structure (3) 1.90" galv. pipe frames; 1.315" bracing | Frame Structure (3) 1.90" galv. pipe frames; 1.315" bracing | Frame Structure 1310-24-FRAME kit; (4) 41" HBAR pipes | Frame Structure (4) HBAR pipes, field cut/drilled to FOB | Frame Structure 1310-1012 kit; (4) 137" HBAR + (4) XBAR braces |
Safety Chains — (wall-braced with steel brackets) | Safety Chains Dual 1/4" GR43 zinc; shackle + turnbuckle | Safety Chains Dual 1/4" GR43; shackle + 1/2" turnbuckle | Safety Chains (2) 1/4" GR43 zinc chains, 48" long | Safety Chains Bottom-board attachment, 45° or greater | Safety Chains (2) 1/4" GR43 zinc chains, 182" long |
Wood Stringers 2 x 8 southern yellow pine, pre-drilled | Wood Stringers 2 x 8 southern yellow pine, pre-drilled | Wood Stringers 2 x 8 southern yellow pine, pre-drilled | Wood Stringers WOOD-KT1 + WOOD-KT2 yellow pine kits | Wood Stringers — | Wood Stringers WOOD-KT1 + WOOD-KT2 yellow pine kits |
Mounting Height Rim 10'-0" above finished floor | Mounting Height Rim 10'-0" above finished floor | Mounting Height Rim 10'-0" above finished floor | Mounting Height Frame stringer 9'-9 1/4" AFF | Mounting Height — | Mounting Height Frame stringer 9'-9 1/4" AFF |
Wall Requirement & Anchors Structural wall (CMU recommended); anchors by others | Wall Requirement & Anchors Structural wall (CMU recommended); anchors by others | Wall Requirement & Anchors Structural wall (CMU recommended); anchors by others | Wall Requirement & Anchors Masonry wall; 1/2" min. anchors, thru-bolt preferred | Wall Requirement & Anchors Masonry wall; 1/2" min. anchors, thru-bolt preferred | Wall Requirement & Anchors Masonry wall; 1/2" min. anchors, thru-bolt preferred |
Warranty 25-year structure; lifetime on Jaypro backboard | Warranty — | Warranty 25-year limited on structure | Warranty — | Warranty — | Warranty — |
Ship Weight 264 lbs | Ship Weight 359 lbs | Ship Weight 412 lbs | Ship Weight 350 lbs | Ship Weight 417 lbs | Ship Weight 485 lbs |
Best for Gyms with tight sidewall clearance needing a compact wall-braced shooting station. | Best for Gyms clearing wall obstructions with a mid-offset chain-supported fan station. | Best for Large gyms requiring maximum-offset aluminum fan practice baskets. | Best for Schools wanting glass-board play with a short wall offset and complete frame kit. | Best for High school gyms with tall walls needing glass boards clear of wall padding. | Best for Large arenas needing the longest-offset braced glass backstop system. |
| $2,086.00 | $2,425.00 | $2,958.00 | $2,911.00 | $3,540.00 | $5,015.00 |
| Check › | Check › | Check › | Check › | Check › | Check › |
Shipping & Returns
We offer standard 1-5 business day shipping (following dispatch) via LTL Freight, FedEx, UPS, DHL, or USPS. Orders typically process in 1-2 business days (starting the following business day). Shipping rates are usually calculated at checkout; however, we reserve the right to provide custom shipping quotes for oversized or specialized equipment.
60-DAY NO-HASSLE REFUNDS AND RETURNS
If there’s an issue with your product, we make refunds and returns quick and easy.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused or unused, with tags, and in its original packaging. To contact us, email info@joysportstore.com
More information on shipping and returns can be found here.
Warranty
25 Year Limited Warranty (structure)
Jaypro Sports (Waterford, Connecticut) warrants its equipment against defects in material and workmanship from the date of shipment. Coverage length depends on the product line — where a specific period is listed above, that period applies to this model. Jaypro warranty periods run as follows:
- Limited Lifetime – glass basketball backboards (GBAFR-48, GBRUB-42, GBRUB-54) against breaks and cracks in the glass when used with a direct goal mount.
- 25 years – structure of wall-mounted basketball backstops and Shooting Station systems.
- 10 years – uprights on FeatherLite, PowerLite and Hybrid Steel volleyball net systems.
- 7 years – Collegiate competition basketball goals (GBA-542 "Shot", GBA-642 "Revolution").
- 5 years – Revolution Series 180° flex basketball goals.
- 3 years – the majority of the catalog: fixed and breakaway basketball goals, aluminum backboards, lacrosse and field hockey goals, floor sleeves, sleeve reducers and floor anchors, referee stands and equipment carriers.
- 1 year – bases, home plates and pitching rubbers, volleyball nets and net accessories (antennas, boundary tape, court lines), batting cage systems and general accessories.
The warranty covers factory defects under normal, intended use. Jaypro will repair, replace or refund the defective item at its discretion; claims require a Return Authorization (RMA) before any item is sent back.
Not covered: normal wear, weather exposure, cosmetic damage that does not affect function, improper installation, use other than intended, and any unauthorized alteration or modification of the original factory configuration. As an authorized Jaypro Sports dealer, JoySportStore files warranty claims directly with the manufacturer on your behalf.