Product Overview
The N24GB kit covers face of bank distances from 2'-0" to 4'-0". Four HBAR-41 horizontal frame pipes are supplied 41" long and are cut and drilled in the field to the exact offset; the installation tables give the frame pipe length and stringer locations for each face of bank in one-inch steps, in both direct attached and height adjuster configurations.
The unit is supported by two 1/4" GRD 43 zinc plated safety chains 48" long, terminated with a 3/8 forged galvanized shackle and a 1/2-13 jaw-jaw galvanized turnbuckle for adjustment. Chain supports must always sit at 45 degrees or greater, and the manual illustrates attachment to the bottom board attachments as the preferred method.
Frame and chains land on southern yellow pine wood stringers: WOOD-KT1 supplies three WH-66 stringers at 7-1/2" x 92" for horizontal mounting, while WOOD-KT2 supplies two WP18 and two WP36 stringers for vertical mounting. Wall anchors are not supplied by Jaypro; the installer selects anchors of at least 1/2" diameter to suit the wall, and the wall must be brick, concrete or other solid or semi-solid masonry. Installation should only be attempted by qualified, properly trained installers.
Specifications
| Specification | Value |
|---|---|
| Model | N24GB stationary wall mounted backstop, 2' to 4' face of bank |
| Backboard | GBRUB-42, 42" x 72" glass backboard |
| Goal | GBA-642 Revolution breakaway goal |
| Frame Kit | 1310-24-FRAME, frame kit for 2' to 4' FOB |
| Horizontal Frame Pipes | (4) HBAR-41 horizontal frame pipe, 41" long, cut and drilled in the field |
| Safety Chains | (2) CN0001, 1/4" GRD 43 zinc plated chain, 48" long |
| Chain Hardware | 3/8 forged galvanized shackle (HM6252) and 1/2-13 jaw-jaw galvanized turnbuckle (HM6273) |
| Hardware Kit | 1310-HDWR wall mount hardware / fitting kit with offset D-ring plates and 7 GA steel hinge brackets |
| Wood Stringer Kit (horizontal) | WOOD-KT1: (3) WH-66 southern yellow pine stringers, 7-1/2" x 92" |
| Wood Stringer Kit (vertical) | WOOD-KT2: (2) WP18 (7-1/2" x 24") and (2) WP36 (7-1/2" x 62-1/2") southern yellow pine |
| Frame Pipe Length (Dim B) | 17" at 2'-0" face of bank up to 41" at 4'-0" face of bank (direct attached) |
| Frame Stringer Height | 9'-9 1/4" above finished floor |
| Chain Angle | 45 degrees minimum |
| Required Wall Height | 16'-5" at 4' FOB with chains attached to the top of the frame |
| Wall Anchors | Supplied by others, minimum 1/2" diameter; thru-bolting preferred |
| Wall Construction | Brick, concrete or other solid / semi-solid masonry required |
| Ship Weight | 350 lbs |
| Ships Via | Freight truck (LTL) |
Compare Jaypro models
|
Fan 9 in.–2 ft. |
Fan 3.5–6 ft. |
Fan 8–10 ft. |
Glass 2–4 ft. THIS |
Glass 6–8 ft. |
Glass 10–12 ft. |
|---|---|---|---|---|---|
Model N2FB | Model N366FB | Model N810FB | Model N24GB | Model N68GB | Model N1012GB |
Wall Offset (Face of Bank) 9" to 2'-0" | Wall Offset (Face of Bank) 3'-6" to 6'-0" | Wall Offset (Face of Bank) 8'-0" to 10'-0" | Wall Offset (Face of Bank) 2'-0" to 4'-0" | Wall Offset (Face of Bank) 6 ft. to 8 ft. | Wall Offset (Face of Bank) 10'-0" to 12'-0" |
Backboard 36" cast aluminum fan (ALB-24BT) | Backboard 36" cast aluminum fan (ALB-24BT) | Backboard 36" cast aluminum fan (ALB-24BT) | Backboard 42" x 72" glass (GBRUB-42) | Backboard Glass backboard | Backboard 42" x 72" glass (GBRUB-42) |
Goal Collegiate "Shot" breakaway (GBA-548) | Goal Collegiate "Shot" breakaway (GBA-548) | Goal Collegiate "Shot" breakaway (GBA-548) | Goal GBA-642 Revolution breakaway | Goal — | Goal GBA-642 Revolution breakaway |
Frame Structure (3) 1.90" galv. pipe frames; steel wall brackets | Frame Structure (3) 1.90" galv. pipe frames; 1.315" bracing | Frame Structure (3) 1.90" galv. pipe frames; 1.315" bracing | Frame Structure 1310-24-FRAME kit; (4) 41" HBAR pipes | Frame Structure (4) HBAR pipes, field cut/drilled to FOB | Frame Structure 1310-1012 kit; (4) 137" HBAR + (4) XBAR braces |
Safety Chains — (wall-braced with steel brackets) | Safety Chains Dual 1/4" GR43 zinc; shackle + turnbuckle | Safety Chains Dual 1/4" GR43; shackle + 1/2" turnbuckle | Safety Chains (2) 1/4" GR43 zinc chains, 48" long | Safety Chains Bottom-board attachment, 45° or greater | Safety Chains (2) 1/4" GR43 zinc chains, 182" long |
Wood Stringers 2 x 8 southern yellow pine, pre-drilled | Wood Stringers 2 x 8 southern yellow pine, pre-drilled | Wood Stringers 2 x 8 southern yellow pine, pre-drilled | Wood Stringers WOOD-KT1 + WOOD-KT2 yellow pine kits | Wood Stringers — | Wood Stringers WOOD-KT1 + WOOD-KT2 yellow pine kits |
Mounting Height Rim 10'-0" above finished floor | Mounting Height Rim 10'-0" above finished floor | Mounting Height Rim 10'-0" above finished floor | Mounting Height Frame stringer 9'-9 1/4" AFF | Mounting Height — | Mounting Height Frame stringer 9'-9 1/4" AFF |
Wall Requirement & Anchors Structural wall (CMU recommended); anchors by others | Wall Requirement & Anchors Structural wall (CMU recommended); anchors by others | Wall Requirement & Anchors Structural wall (CMU recommended); anchors by others | Wall Requirement & Anchors Masonry wall; 1/2" min. anchors, thru-bolt preferred | Wall Requirement & Anchors Masonry wall; 1/2" min. anchors, thru-bolt preferred | Wall Requirement & Anchors Masonry wall; 1/2" min. anchors, thru-bolt preferred |
Warranty 25-year structure; lifetime on Jaypro backboard | Warranty — | Warranty 25-year limited on structure | Warranty — | Warranty — | Warranty — |
Ship Weight 264 lbs | Ship Weight 359 lbs | Ship Weight 412 lbs | Ship Weight 350 lbs | Ship Weight 417 lbs | Ship Weight 485 lbs |
Best for Gyms with tight sidewall clearance needing a compact wall-braced shooting station. | Best for Gyms clearing wall obstructions with a mid-offset chain-supported fan station. | Best for Large gyms requiring maximum-offset aluminum fan practice baskets. | Best for Schools wanting glass-board play with a short wall offset and complete frame kit. | Best for High school gyms with tall walls needing glass boards clear of wall padding. | Best for Large arenas needing the longest-offset braced glass backstop system. |
| $2,086.00 | $2,425.00 | $2,958.00 | $2,911.00 | $3,540.00 | $5,015.00 |
| Check › | Check › | Check › | Viewing | Check › | Check › |
Shipping & Returns
We offer standard 1-5 business day shipping (following dispatch) via LTL Freight, FedEx, UPS, DHL, or USPS. Orders typically process in 1-2 business days (starting the following business day). Shipping rates are usually calculated at checkout; however, we reserve the right to provide custom shipping quotes for oversized or specialized equipment.
60-DAY NO-HASSLE REFUNDS AND RETURNS
If there’s an issue with your product, we make refunds and returns quick and easy.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused or unused, with tags, and in its original packaging. To contact us, email info@joysportstore.com
More information on shipping and returns can be found here.
Warranty
Jaypro Sports (Waterford, Connecticut) warrants its equipment against defects in material and workmanship from the date of shipment. Coverage length depends on the product line — where a specific period is listed above, that period applies to this model. Jaypro warranty periods run as follows:
- Limited Lifetime – glass basketball backboards (GBAFR-48, GBRUB-42, GBRUB-54) against breaks and cracks in the glass when used with a direct goal mount.
- 25 years – structure of wall-mounted basketball backstops and Shooting Station systems.
- 10 years – uprights on FeatherLite, PowerLite and Hybrid Steel volleyball net systems.
- 7 years – Collegiate competition basketball goals (GBA-542 "Shot", GBA-642 "Revolution").
- 5 years – Revolution Series 180° flex basketball goals.
- 3 years – the majority of the catalog: fixed and breakaway basketball goals, aluminum backboards, lacrosse and field hockey goals, floor sleeves, sleeve reducers and floor anchors, referee stands and equipment carriers.
- 1 year – bases, home plates and pitching rubbers, volleyball nets and net accessories (antennas, boundary tape, court lines), batting cage systems and general accessories.
The warranty covers factory defects under normal, intended use. Jaypro will repair, replace or refund the defective item at its discretion; claims require a Return Authorization (RMA) before any item is sent back.
Not covered: normal wear, weather exposure, cosmetic damage that does not affect function, improper installation, use other than intended, and any unauthorized alteration or modification of the original factory configuration. As an authorized Jaypro Sports dealer, JoySportStore files warranty claims directly with the manufacturer on your behalf.