Product Overview
The N810GB is one of the longer-offset units in Jaypro's stationary wall-mounted backstop family, alongside the N24GB, N46GB, N68GB and N1012GB. A fixed steel frame carries the glass backboard at a set distance from the wall, with this model covering the eight to ten foot range. Four horizontal frame pipes come with the wall mount kit and are cut and drilled in the field, since their length and hole pattern depend directly on the face of bank being built.
Longer offsets put more demand on the structure behind the backstop. The wall must be brick, concrete or another solid or semi-solid masonry construction, and it has to support the entire load of the backstop and accessories plus the extra loading of a player dunking and hanging on the rim. Jaypro supplies no wall anchors; the installer chooses anchors of at least half an inch in diameter to suit the wall, thru-bolting where possible, ideally at least twice per stringer with additional anchors alongside.
Chain supports triangulate the frame back to the structure and must always sit at forty-five degrees or greater. Anchoring them to the bottom board attachments is the preferred method, while attachment to the top board attachments is available where site conditions require it. Because required wall height climbs with the offset, the upper wall and ceiling should be checked before ordering; where height or structure is insufficient, chains can be taken to the ceiling structure using attachments designed by Jaypro. Annual preventive maintenance keeps hardware tight as building and play vibration works on the connections.
Specifications
| Specification | Value |
|---|---|
| Model | N810GB |
| Type | Stationary wall-mounted basketball backstop with glass backboard |
| Wall Offset (Face of Bank) | 8 ft. to 10 ft. |
| Required Wall Height (chains to bottom of frame) | 17' - 5" at 8 ft. FOB; 19' - 5" at 10 ft. FOB |
| Required Wall Height (chains to top of frame) | 20' - 5" at 8 ft. FOB; 22' - 5" at 10 ft. FOB |
| Chain Supports | Preferred attachment to bottom board attachments; must always be 45 degrees or greater |
| Alternate Chain Mounting | Top board attachments; add 36" to DIM C |
| Horizontal Frame Pipes | Four HBAR-XX pipes, field cut and drilled to suit the face of bank |
| Wall Anchors | Supplied by others; minimum 1/2" diameter, thru-bolting preferred |
| Required Wall Construction | Brick, concrete or other solid / semi-solid masonry |
| Installation | Qualified, trained installers only; wall must carry the full backstop load plus dunking and hanging loads |
| Maintenance | Annual preventive maintenance by a qualified installer or technician |
| Documentation | Installation and Maintenance Manual, 18 sheets |
| Series Models | N24GB / N46GB / N68GB / N810GB / N1012GB |
| Origin | Jaypro Sports, Waterford, CT USA |
| Ship Weight | 466 lbs |
| Ships Via | Freight truck (LTL) |
Compare Jaypro models
|
Fan 9 in.–2 ft. |
Fan 3.5–6 ft. |
Fan 8–10 ft. |
Glass 2–4 ft. |
Glass 6–8 ft. |
Glass 10–12 ft. |
|---|---|---|---|---|---|
Model N2FB | Model N366FB | Model N810FB | Model N24GB | Model N68GB | Model N1012GB |
Wall Offset (Face of Bank) 9" to 2'-0" | Wall Offset (Face of Bank) 3'-6" to 6'-0" | Wall Offset (Face of Bank) 8'-0" to 10'-0" | Wall Offset (Face of Bank) 2'-0" to 4'-0" | Wall Offset (Face of Bank) 6 ft. to 8 ft. | Wall Offset (Face of Bank) 10'-0" to 12'-0" |
Backboard 36" cast aluminum fan (ALB-24BT) | Backboard 36" cast aluminum fan (ALB-24BT) | Backboard 36" cast aluminum fan (ALB-24BT) | Backboard 42" x 72" glass (GBRUB-42) | Backboard Glass backboard | Backboard 42" x 72" glass (GBRUB-42) |
Goal Collegiate "Shot" breakaway (GBA-548) | Goal Collegiate "Shot" breakaway (GBA-548) | Goal Collegiate "Shot" breakaway (GBA-548) | Goal GBA-642 Revolution breakaway | Goal — | Goal GBA-642 Revolution breakaway |
Frame Structure (3) 1.90" galv. pipe frames; steel wall brackets | Frame Structure (3) 1.90" galv. pipe frames; 1.315" bracing | Frame Structure (3) 1.90" galv. pipe frames; 1.315" bracing | Frame Structure 1310-24-FRAME kit; (4) 41" HBAR pipes | Frame Structure (4) HBAR pipes, field cut/drilled to FOB | Frame Structure 1310-1012 kit; (4) 137" HBAR + (4) XBAR braces |
Safety Chains — (wall-braced with steel brackets) | Safety Chains Dual 1/4" GR43 zinc; shackle + turnbuckle | Safety Chains Dual 1/4" GR43; shackle + 1/2" turnbuckle | Safety Chains (2) 1/4" GR43 zinc chains, 48" long | Safety Chains Bottom-board attachment, 45° or greater | Safety Chains (2) 1/4" GR43 zinc chains, 182" long |
Wood Stringers 2 x 8 southern yellow pine, pre-drilled | Wood Stringers 2 x 8 southern yellow pine, pre-drilled | Wood Stringers 2 x 8 southern yellow pine, pre-drilled | Wood Stringers WOOD-KT1 + WOOD-KT2 yellow pine kits | Wood Stringers — | Wood Stringers WOOD-KT1 + WOOD-KT2 yellow pine kits |
Mounting Height Rim 10'-0" above finished floor | Mounting Height Rim 10'-0" above finished floor | Mounting Height Rim 10'-0" above finished floor | Mounting Height Frame stringer 9'-9 1/4" AFF | Mounting Height — | Mounting Height Frame stringer 9'-9 1/4" AFF |
Wall Requirement & Anchors Structural wall (CMU recommended); anchors by others | Wall Requirement & Anchors Structural wall (CMU recommended); anchors by others | Wall Requirement & Anchors Structural wall (CMU recommended); anchors by others | Wall Requirement & Anchors Masonry wall; 1/2" min. anchors, thru-bolt preferred | Wall Requirement & Anchors Masonry wall; 1/2" min. anchors, thru-bolt preferred | Wall Requirement & Anchors Masonry wall; 1/2" min. anchors, thru-bolt preferred |
Warranty 25-year structure; lifetime on Jaypro backboard | Warranty — | Warranty 25-year limited on structure | Warranty — | Warranty — | Warranty — |
Ship Weight 264 lbs | Ship Weight 359 lbs | Ship Weight 412 lbs | Ship Weight 350 lbs | Ship Weight 417 lbs | Ship Weight 485 lbs |
Best for Gyms with tight sidewall clearance needing a compact wall-braced shooting station. | Best for Gyms clearing wall obstructions with a mid-offset chain-supported fan station. | Best for Large gyms requiring maximum-offset aluminum fan practice baskets. | Best for Schools wanting glass-board play with a short wall offset and complete frame kit. | Best for High school gyms with tall walls needing glass boards clear of wall padding. | Best for Large arenas needing the longest-offset braced glass backstop system. |
| $2,086.00 | $2,425.00 | $2,958.00 | $2,911.00 | $3,540.00 | $5,015.00 |
| Check › | Check › | Check › | Check › | Check › | Check › |
Shipping & Returns
We offer standard 1-5 business day shipping (following dispatch) via LTL Freight, FedEx, UPS, DHL, or USPS. Orders typically process in 1-2 business days (starting the following business day). Shipping rates are usually calculated at checkout; however, we reserve the right to provide custom shipping quotes for oversized or specialized equipment.
60-DAY NO-HASSLE REFUNDS AND RETURNS
If there’s an issue with your product, we make refunds and returns quick and easy.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused or unused, with tags, and in its original packaging. To contact us, email info@joysportstore.com
More information on shipping and returns can be found here.
Warranty
Jaypro Sports (Waterford, Connecticut) warrants its equipment against defects in material and workmanship from the date of shipment. Coverage length depends on the product line — where a specific period is listed above, that period applies to this model. Jaypro warranty periods run as follows:
- Limited Lifetime – glass basketball backboards (GBAFR-48, GBRUB-42, GBRUB-54) against breaks and cracks in the glass when used with a direct goal mount.
- 25 years – structure of wall-mounted basketball backstops and Shooting Station systems.
- 10 years – uprights on FeatherLite, PowerLite and Hybrid Steel volleyball net systems.
- 7 years – Collegiate competition basketball goals (GBA-542 "Shot", GBA-642 "Revolution").
- 5 years – Revolution Series 180° flex basketball goals.
- 3 years – the majority of the catalog: fixed and breakaway basketball goals, aluminum backboards, lacrosse and field hockey goals, floor sleeves, sleeve reducers and floor anchors, referee stands and equipment carriers.
- 1 year – bases, home plates and pitching rubbers, volleyball nets and net accessories (antennas, boundary tape, court lines), batting cage systems and general accessories.
The warranty covers factory defects under normal, intended use. Jaypro will repair, replace or refund the defective item at its discretion; claims require a Return Authorization (RMA) before any item is sent back.
Not covered: normal wear, weather exposure, cosmetic damage that does not affect function, improper installation, use other than intended, and any unauthorized alteration or modification of the original factory configuration. As an authorized Jaypro Sports dealer, JoySportStore files warranty claims directly with the manufacturer on your behalf.