Product Overview
The Safstop is designed to prevent free-fall of backstops caused by cable, pulley, support fitting or winch failure. Any sudden surge of speed quickly locks the unit and holds the backstop in any position, and it does so before the belt travels 3" (76 mm) in a free-fall. The unit is rated to capture a 1000 lb (454 kg) free falling load and has been tested to capture a 1750 lb (794 kg) free falling load without structural or belt failure. Gared cautions that this rating does not ensure that other components, such as the building structure, will withstand that load.
The Safstop attaches to 3 1/2" (89 mm) or 4" (102 mm) O.D. overhead superstructure with a universal mounting bracket that allows the tubing to run either parallel or perpendicular to the unit. The 2" (51 mm) wide nylon belt has a tensile strength of 6000 lbs (2722 kg) and can extend 35 feet (10.7 m); it is attached to the backstop frame with a buckle connection. A yellow warning indicator is exposed if the Safstop has been engaged, so staff can see at a glance that the unit needs attention.
The locking mechanism sits inside a cast aluminum housing and works by inertial force for immediate and positive setting, or by centrifugal force for slower setting. The Safstop has an automatic spring-loaded reset and needs no electricity to operate, and it is fully functional during storage, raising and lowering of backstops. For taller backstops, model 1100-45 offers the same specifications with a strap that extends 45 ft (13.7 m).
Specifications
| Specification | Value |
|---|---|
| Model | 1100 Safstop backstop safety lock |
| UPC | 00842299101071 |
| Material | Steel / nylon |
| Belt | 2" (51 mm) wide nylon belt, 6000 lbs (2722 kg) tensile strength |
| Maximum Belt Length | 35 ft (10.7 m) |
| Rated Capture Load | 1000 lb (454 kg) free falling load |
| Tested To | 1750 lb (794 kg) free falling load without structural or belt failure |
| Lock Travel | Locks the backstop before the belt travels 3" (76 mm) in a free-fall |
| Mounting | Universal mounting bracket for 3 1/2" (89 mm) or 4" (102 mm) O.D. overhead tube superstructure, parallel or perpendicular |
| Locking Mechanism | Inertial force for immediate setting or centrifugal force for slower setting; contained in a cast aluminum housing |
| Reset | Automatic spring-loaded reset; no electricity required to operate |
| Engagement Indicator | Yellow warning indicator is exposed if the Safstop has been engaged |
| Belt Attachment | Buckle connection to the backstop frame |
| Longer-Strap Model | 1100-45 with 45 ft (13.7 m) strap for taller backstops |
| Ship Weight | 19 lbs / 8.62 kg |
| Shipping | UPS; 7" x 10" (HxW) |
| Origin | US |
Compare Gared models
|
Safstop THIS |
Manual 1123 |
Winder 1119 |
Curtain 4002 |
Hoist 1194 |
Hoist 1197 |
|---|---|---|---|---|---|
Type Backstop safety lock (fall arrest) | Type Manual worm-gear backstop winch | Type Portable electric winder for manual winches | Type Electric divider curtain hoist | Type Electric backstop hoist with key switch | Type Electric backstop hoist with wireless receiver |
Electrical None; no electricity required to operate | Electrical None; hand operated | Electrical 115-120 VAC, 60 Hz, 4.5 A, single phase | Electrical 115 VAC, 60 Hz, single phase | Electrical 110/115/120 VAC, 60 Hz, 1 PH, UL Listed | Electrical 110/115/120 VAC, 60 Hz, 1 PH dedicated circuit |
Motor — | Motor — | Motor Heavy duty double insulated, 350 rpm max speed | Motor 3/4 HP instant reverse, thermally protected | Motor 3/4 HP min, 9.5 A, instant reversing, protected | Motor 3/4 HP, instant reversing, thermal overload |
Load rating 1,000 lb free fall; tested to 1,750 lb | Load rating 1,000 lbs / 453.6 kg | Load rating — | Load rating 2,700 in-lbs maximum torque | Load rating 1,250 lbs continuous lift for 15 minutes | Load rating Up to 1,000 lbs |
Gearing / drive Inertial or centrifugal lock, cast aluminum housing | Gearing / drive Semi-enclosed self-lubricating worm gear, 3/4" drive | Gearing / drive Geometric right-angle drive | Gearing / drive 200:1 hardened worm gear, sealed case | Gearing / drive 200:1 sealed worm gearbox, hardened metal gears | Gearing / drive 200:1 double worm gear box |
Braking & limits Locks within 3" of belt travel; auto spring reset | Braking & limits Double self-locking worm gear, uni-directional brake | Braking & limits Reversing switch; no need to disengage winder | Braking & limits Gear driven upper/lower limit switches, 50 turns | Braking & limits Gear driven upper/lower limit switches, 55' max | Braking & limits Positive locking gearbox; thermal overload |
Cable / belt & travel 2" nylon belt, 6,000 lb tensile, 35 ft max | Cable / belt & travel 1/4" aircraft cable (sold separately); grooved drum | Cable / belt & travel — | Cable / belt & travel Double 1" dia. output shaft drum | Cable / belt & travel 1/4" 7x19 cable (not supplied); 55' at 9.5 FPM | Cable / belt & travel — |
Controls Automatic; yellow engagement warning indicator | Controls Removable handle with free turning sleeve | Controls Reversing switch, two handles, 8-ft cord | Controls 3-position momentary key switch included | Controls Key switch 1195-01-00 included; 6' L14-20 cord | Controls Wireless receiver + key switch; 1198 transmitter extra |
Mounting / application Universal bracket for 3-1/2" or 4" O.D. tube | Mounting / application Wall mounted; wood mounting pad included | Mounting / application Portable; impact resistant hinged folding case | Mounting / application For 4020/4030 curtains, 4080 multi-sport cage | Mounting / application Steel frame hardware for 3.5" dia. tubing | Mounting / application Right side up or upside down; 3-1/2" pipe clamp |
Duty cycle — | Duty cycle — | Duty cycle — | Duty cycle 10 minutes ON / 20 minutes OFF | Duty cycle 15 minutes ON / 20 minutes OFF | Duty cycle — |
Ship Weight 19 lbs | Ship Weight 36 lbs | Ship Weight 18 lbs | Ship Weight 47 lbs | Ship Weight 77 lbs | Ship Weight 79 lbs |
Best for Gyms adding required fall-arrest protection to overhead backstops. | Best for Facilities that raise folding backstops by hand without electrical service. | Best for Schools wanting to power existing manual winches with one portable tool. | Best for Gyms motorizing divider curtains or multi-sport cage systems. | Best for Facilities needing keyed electric operation of ceiling-suspended backstops. | Best for Multi-court gyms operating several backstops from one wireless transmitter. |
| $1,080.32 | $1,166.00 $1,080.32 | $1,794.00 $1,662.04 | $708.00 | $2,077.55 | $2,742.36 |
| Viewing | Check › | Check › | Check › | Check › | Check › |
Shipping & Returns
We offer standard 1-5 business day shipping (following dispatch) via LTL Freight, FedEx, UPS, DHL, or USPS. Orders typically process in 1-2 business days (starting the following business day). Shipping rates are usually calculated at checkout; however, we reserve the right to provide custom shipping quotes for oversized or specialized equipment.
60-DAY NO-HASSLE REFUNDS AND RETURNS
If there’s an issue with your product, we make refunds and returns quick and easy.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused or unused, with tags, and in its original packaging. To contact us, email info@joysportstore.com
More information on shipping and returns can be found here.
Warranty
5-Year Limited Warranty on the Model 1100 safety strap
Gared Holdings LLC warrants its equipment against defects in material or factory workmanship. Coverage length depends on the product line — this model carries the warranty noted above where listed. Gared's warranty periods run as follows:
- Lifetime - Endurance playground systems: in-ground post, extension arm and bracing components.
- 25 years - Standard Duty and Heavy Duty playground posts (braced gooseneck and adjustable straight post structures).
- 10 years - volleyball uprights on OmniSteel, OmniLite, RallyLine and GoCourt systems, and economy playground posts.
- 5 years - FGP series football goalposts, manual and electric winches, curtain hoists and the SafStop gymnasium structure.
- 4 years - 2500 / 2500I Tournament breakaway goals.
- 3 years - winch assemblies, floor sleeves and cover plates, and regulation volleyball nets.
- 2 years - portable winch winders and selected backboards.
- 1 year - nets, padding, base adapters, height adjusters, badminton and tetherball systems, referee stands and accessories.
The warranty period starts on the date of substantial completion (installation). Defects must be reported to Gared in writing during the warranty period with proof of purchase and the purchase or installation date; Gared will repair or replace the defective equipment at its discretion, with shipping, insurance and installation costs borne by the owner.
Not covered: improper installation, use other than intended, unauthorized alterations or modifications, abuse or misuse, and damage from fire, flood, wind or lightning. Liability is limited to repair or replacement of the defective equipment. As an authorized Gared dealer, JoySportStore files warranty claims directly with the manufacturer on your behalf.