AeroVent Aerosol Can Disposal Systems

Newstripe AeroVent Aerosol Can Disposal Systems Explained

A newstripe aerosol can disposal system is built to puncture spent aerosol cans, vent trapped propellant, and crush the empty shells so facilities can dispose of or recycle aerosol waste more compactly and safely than tossing cans in a standard dumpster. The mechanical parts sold in this collection — spark-resistant cobalt puncture points, plunger block sets, operating handles, and grounding cable assemblies — all point to how the AeroVent line works: a can is placed in a trough, the lid is closed and clamped, a lever-operated puncture point pierces the can, and any residual propellant is routed out through a filter before the can is crushed. JoySportStore carries the complete Newstripe catalog for this category, so you can buy a full system or source individual wear parts as your existing unit ages.

AeroVent Standard vs. AeroVent Crush 3X vs. Safe2Vent Filters

Newstripe sells more than one configuration, and the parts list makes the differences clear. The AeroVent Standard Aerosol Can Disposal System is the single-can unit, supported by matching parts like the Support Foot for Single Can AeroVents, Trough Liner with Can Stop for Single Can AeroVent, and Operating Handle for Single Can AeroVents. The AeroVent Crush 3X steps up throughput with its own dedicated hardware — Trough Liner for AeroVent 3X, Operating Handle/Clamp Assembly for AeroVent 3X, Can Guide 2″ for AeroVent 3X, and a Front Support Foot for AeroVent 3X — making it the choice for higher-volume operations processing more cans per shift. For facilities that need a filtered-venting option rather than (or in addition to) crushing, Newstripe also offers the Safe2Vent Single Filter Assembly and Safe2Vent Dual Filter Assembly, each with its own Lid/Base Kit.

Quick Comparison

• AeroVent Standard: single-can puncture and crush unit; parts stocked for lid, trough, and support feet.
• AeroVent Crush 3X: higher-capacity system with 3X-specific trough, clamp, flange gasket, and guide hardware.
• Safe2Vent Filter Assemblies: single or dual filter configurations for facilities prioritizing filtered vent capture.

Replacement Parts & Wear Components for AeroVent Systems

Because AeroVent units puncture and crush metal cans daily, several components are designed as replaceable wear items, and JoySportStore stocks them individually so a working machine doesn't have to sit idle waiting on a full system swap. Commonly ordered parts include:

• Trough Spring, Trough Bellow Replacement, and Trough Bellow Clamp
• Trough Liner Grommet (4 Pack) and Trough Liner for AeroVent 3X
• Lid Gasket for AeroVent Std & 1X and Lid Gasket for AeroVent 3X
• Lid Grommet, Lid Handle, and Flange Gasket for AeroVent 3X
• Spark Resistant Cobalt Puncture Point & Screw
• Swivel Foot, Rear Leveler Support Foot, and Front Support Foot for AeroVent 3X
• Grounding Cable Assembly and Door Safety Valve
• Jam Nut and Plunger Block Set

These parts are sized and named to match specific AeroVent models (Standard, 1X, 3X), so check your existing unit's model before ordering a gasket, liner, or bellow to make sure it's the correct fit.

Maintenance Kits and Keeping Your Newstripe AeroVent Running

Newstripe packages its most frequently replaced components into the AeroVent Maintenance Kit and the AeroVent 3X Maintenance Kit, which bundle several of the wear parts above into a single order instead of purchasing gaskets, springs, and bellows separately. For shops running a unit daily, keeping a maintenance kit on hand reduces downtime between service intervals. The Decal Kit for AeroVent Standard & 1X and Decal Kit for AeroVent 3X are also worth restocking alongside a maintenance kit, since safety and operating labels wear off with regular handling in a busy facility.

Installation, Mounting, and Facility Setup

AeroVent systems are freestanding units leveled and stabilized with support feet — the Swivel Foot, Support Foot for Single Can AeroVents, Rear Leveler Support Foot, and Front Support Foot for AeroVent 3X all handle floor leveling depending on your model. The Grounding Cable Assembly is used to ground the unit during operation, and the Door Safety Valve is part of the lid/closure safety hardware. For facilities marking a designated disposal area, the Waste Aerosol Cans Disposal Stencil is a low-cost way to paint floor signage identifying where cans should be brought for processing. Rounding out the collection, the BigSqueeze Conversion Kit for Aerosol Can Crushing and the 17″ Ram Plate for PackMaster Manual Compactor support related crushing/compaction workflows for shops running Newstripe compaction equipment alongside their AeroVent system.