Basketball Hoop Parts & Goal Replacement Parts

Basketball Hoop Parts & Basketball Goal Replacement Parts by Douglas, First Team, Jaypro & More

When a basketball goal stops adjusting smoothly, a brace cracks, or a rim loses its rubber band, you don't need a new system — you need the right basketball equipment parts. This collection groups 53 active components from Douglas (19), First Team (18), Jaypro (12), Ironclad (2), Gared (1), and Newstripe (1), covering the mechanical hardware that keeps wall-mount, in-ground, and portable-style commercial goals functioning: crank actuators, height adjusters, braces, anchors, tie wraps, spring links, gear assemblies, and rim hardware. Prices run from under $10 for small hardware like tie wraps and carabiners up to $2,165 for larger assemblies such as the Douglas Premium In-Line LED Court Lighting System, so you can shop by the specific part rather than paying for a whole new goal.

What's in the Catalog

• Height adjustment: Jaypro Manual Hand Crank Backboard Height Adjuster, First Team FT300 and FT310 Basketball Backboard Height Adjusters, Jaypro Little Champ Easy Adjust Backboard Adapter.
• Crank actuators: Ironclad CRKACT-2.5 for GameChanger units, First Team FT3010-CRK and PH05/06-CRK.
• Braces & locks: First Team FT3010BC Rampage Braces, FT1900BC Braces Only, FT12 and FT12XT Key Operated Handle Locks.
• Anchoring & mounting: Ironclad Bolt Down Anchor Kit, Douglas In-Ground Permanent Anchors (set of 4), Jaypro Shot Clock Mounting Brackets in multiple drop-mast sizes.
• Small hardware: Douglas Spring Link Carabiners (6mm, 7mm, 8mm), Douglas Tie Wraps (12" at 50 lb. and 14" at 120 lb. break strength), Jaypro Padding Ties (set of 100).

Backboard Height Adjusters, Crank Actuators & Wall Braces

If your search brought you here for basketball hoop replacement parts tied to height adjustment, this is the core of the collection. Jaypro's Manual Hand Crank adjuster and First Team's FT300/FT310 units let a wall-mount or portable-style goal move between recreational and regulation heights, while spring-assist cylinders (First Team FT1600-SPG and FT1400-SPG) support the lift mechanism on goals that use a gas-spring design instead of a crank. For systems with a failed crank gearbox, Ironclad's CRKACT-2.5 and First Team's FT3010-CRK and PH05/06-CRK are direct actuator replacements rather than full backboard adjuster units. Wall-mounted backboards that have developed play or cracked support arms can be re-stabilized with First Team's FT3010BC Rampage Braces or FT1900BC Braces Only — both are structural braces, not full mounting systems, so measure your existing bracket spacing before ordering.

Anchors, Mounting Brackets & Rim Hardware

For parts for basketball goal installation and upgrades, the anchoring hardware in this collection covers both permanent and semi-permanent setups. Ironclad's Bolt Down Anchor Kit uses a 9"x9" four-bolt pattern for surface-mounted in-ground poles, while Douglas offers a set of four In-Ground Permanent Anchors for direct-bury installations. Jaypro's Shot Clock Mounting Brackets come in three drop-mast sizes — 6 in. single, 6-5/8 in. single, and 2-3/8 in. double — so check your existing mast diameter before buying. Rim and net hardware includes the Jaypro Rubber Rim Replacement Band Kit sized for a 30 in. base, Douglas's Velcro ACS Adjustable Center Strap for padding, and Douglas Spring Link Carabiners in 6mm, 7mm, and 8mm for connecting padding, nets, or safety lines.

Choosing the Right Basketball Equipment Parts for Your Setup

Most of what's stocked here — Douglas, First Team, Jaypro, Ironclad, and Gared — is built for school, park, and facility-grade basketball goals rather than as OEM replacement parts for specific consumer brands. If you're searching for parts tied to a particular portable hoop brand name, measure your current hardware (bolt pattern, mast diameter, brace length, crank thread) and compare it against the specs in each product title here, since fit is based on physical dimensions rather than brand matching. For facility managers replacing worn braces or actuators on Gared, First Team, or Jaypro systems already installed on-site, matching the same brand generally simplifies fit.