Aerosol Can Disposal Systems

Aerosol Can Disposal Systems Built Around the Newstripe AeroVent Line

Every complete unit in this collection is a Newstripe AeroVent aerosol can disposal system, sized for different can volumes and shop layouts. The AeroVent Standard Aerosol Can Disposal System handles single-can puncture-and-drain duty, while the AeroVent Crush 3X Aerosol Can Disposal System is built for higher throughput with a 2" can guide and an operating handle/clamp assembly rated for repeated cycles. Safe2Vent Single and Dual Filter Assemblies bolt onto an AeroVent to add extra filtration stages between the trough and the vent path. For shops that already run a mechanical compactor, the BigSqueeze Conversion Kit adapts aerosol can crushing onto existing equipment, and the 17" Ram Plate is a direct fit for a PackMaster Manual Compactor.

Who These Systems Suit

Facilities that generate a steady stream of empty spray-paint, lubricant, or cleaner cans — auto body shops, fleet garages, manufacturing plants, and school or municipal maintenance departments — are the typical buyers for a full aerosol disposal system. Smaller operations that only need to restock hardware or extend the life of a unit they already own can order individual parts instead of a whole system.

How This Aerosol Puncture and Recycle Equipment Works

An AeroVent works by puncturing a sealed aerosol can, draining remaining propellant and product into a contained trough, and routing vapor through a filtered vent path so the empty can can be recycled as scrap metal rather than handled as hazardous waste. The Spark Resistant Cobalt Puncture Point & Screw is the wear part that actually opens the can; the Plunger Block Set and Jam Nut keep that puncture action aligned over repeated cycles. A Trough Bellow Replacement and Trough Bellow Clamp seal the puncture chamber, while the Trough Liner (with Can Stop for single-can units, or sized for the AeroVent 3X) catches drained liquid and simplifies cleanout. A Grounding Cable Assembly is included in the parts list for static-discharge control during puncture, and a Door Safety Valve is part of the assembly that governs chamber pressure during operation.

OSHA-Compliant Aerosol Can Disposal: What Facilities Look For

Many facilities searching for an OSHA compliant aerosol can disposal system are really looking for equipment that evacuates propellant and product from a can before it's scrapped, since an unpunctured aerosol can is generally handled as hazardous waste. Puncture-and-drain systems like the AeroVent line address that step directly, and the individual safety-related parts sold here — the grounding cable assembly, spark-resistant puncture point, and door safety valve — are the components a facility's safety team will typically check when reviewing a unit already in service. We don't publish third-party certifications for these systems, so confirm your specific compliance requirements against your local waste and safety regulations before purchasing.

Replacement Parts and Maintenance Kits for Units You Already Own

Because AeroVent systems are mechanical and see repeated daily cycles, most of this collection is replacement hardware rather than complete units. Wear and seal parts include the Trough Spring, Trough Liner Grommet (4 Pack), Lid Grommet, Lid Gasket (sized separately for AeroVent Std & 1X versus AeroVent 3X), and Flange Gasket for AeroVent 3X. Structural and support parts cover the Swivel Foot, Support Foot for single-can AeroVents, Rear Leveler Support Foot, and Front Support Foot for AeroVent 3X, along with the Operating Handle for single-can units and the Operating Handle/Clamp Assembly for the 3X. Decal Kits are sold separately for AeroVent Standard & 1X and for the AeroVent 3X, so match the kit to your unit's model. For scheduled upkeep, the AeroVent Maintenance Kit and AeroVent 3X Maintenance Kit bundle the parts most commonly replaced in a service interval, and the Lid/Base Kit fits the Safe2Vent filter housing specifically.

Choosing Between AeroVent Standard, Crush 3X, and Safe2Vent Filter Assemblies

The AeroVent Standard is the base single-can puncture-and-drain configuration, suited to lower-volume aerosol can recycling equipment needs. The AeroVent Crush 3X steps up throughput with a wider can guide and a heavier-duty handle/clamp assembly for shops processing more cans per cycle. Safe2Vent Single and Dual Filter Assemblies layer onto either system to add filtration stages, and the Lid/Base Kit is the direct-fit housing part for that filter assembly. Also stocked: a Waste Aerosol Cans Disposal Stencil for labeling collection points as part of a documented disposal program.