Product Overview
FeatherLite uprights are built from high tensile strength extruded aluminum tubing with a durable anodized finish, which keeps individual upright weight low enough for one person to handle while retaining the stiffness needed for competition net tension. Engraved height markings for men's and women's official heights make setup repeatable, and the quick release locking pin stays attached to the upright by a nylon lanyard so it cannot be misplaced.
The upper section carries a recessed impact resistant polycarbonate pulley wheel that routes the net tensioning straps, while the lower section has a molded composite foot that protects finished flooring during transport, storage and installation. The included net tensioning winch uses an enclosed worm gear with a high efficiency turn ratio to eliminate snap back and is mounted on the lower section, outside the court, for player safety.
Floor sleeves are required to install the system and are not included with the uprights.
Specifications
| Specification | Value |
|---|---|
| Part Number | PVB-55U |
| Type | FeatherLite telescoping volleyball uprights (pair) |
| Certification | NCAA, NFHS, USVBA compliant |
| Post Material | High tensile strength extruded aluminum tubing |
| Post Diameter | 3.50" OD |
| Wall Thickness | 0.203" |
| Finish | Durable anodized |
| Floor Sleeve | Snug fit into 2" ID, 7.5" depth aluminum floor sleeves (sleeves required, not included) |
| Height Adjustment | Telescoping, secured by positive locking quick release pin fixed to the upright with a nylon lanyard |
| Net Heights | Men's 7' 11-5/8", Women's 7' 4-1/8" |
| Height Markings | Engraved men's and women's official heights |
| Pulley Wheel | Recessed impact resistant polycarbonate 4" pulley wheel for net tensioning straps |
| Base Protection | Molded composite foot on lower section |
| Winch | PVBWINCH included; internal worm gear with 10:1 turn ratio, welded steel cover, folding handle |
| Winch Location | Lower section of the upright, exterior to the court |
| Weight | Individual upright not to exceed 40 lbs. |
| Ship Weight | 89 lbs |
| Ships Via | Freight truck (LTL) |
Compare Jaypro models
|
Uprights Only THIS |
FeatherLite 3.5 in. |
FeatherLite Deluxe |
PowerLite Deluxe |
Carbon 3.5 in. |
Carbon Deluxe 3.5 in. |
|---|---|---|---|---|---|
System Type Telescoping uprights only (pair) with winch | System Type Aluminum competition system, 3-1/2 in. sleeve | System Type Aluminum package: net, antennas, padding | System Type Aluminum package: net, antennas, padding | System Type Carbon system: uprights, net, pads, antennae | System Type Carbon deluxe package: net, pads, antennae |
Uprights Anodized aluminum, 3.50 in. OD, 0.203 in. wall | Uprights Anodized aluminum, 3.50 in. OD, 0.203 in. wall | Uprights Anodized aluminum, 3.50 in. OD, 0.203 in. wall | Uprights Anodized aluminum, 3.50 in. OD, 0.203 in. wall | Uprights Carbon composite poles | Uprights Carbon composite uprights |
Upright Weight (each) Not to exceed 40 lbs | Upright Weight (each) Not to exceed 40 lbs | Upright Weight (each) Not to exceed 40 lbs | Upright Weight (each) — | Upright Weight (each) Under 16-3/4 lbs (under 20 lbs with winch) | Upright Weight (each) Under 16-3/4 lbs (under 20 lbs with winch) |
Floor Sleeve Fit 2 in. ID x 7.5 in. deep aluminum (required, not incl.) | Floor Sleeve Fit 3.570 in. ID x 10 in. deep aluminum (sold separately) | Floor Sleeve Fit 3.570 in. ID x 10 in. deep aluminum (Ø 3.5 in.) | Floor Sleeve Fit 3.570 in. ID x 10 in. deep aluminum (Ø 3.5 in.) | Floor Sleeve Fit 3-1/2 in. diameter sleeves; feet adjust ±1-1/2 in. | Floor Sleeve Fit 3-1/2 in. diameter sleeves; feet adjust ±1-1/2 in. |
Net Height Adjustment Quick release pin with lanyard, engraved markings | Net Height Adjustment Positive locking quick release pin with lanyard | Net Height Adjustment Positive locking quick-release pin with lanyard | Net Height Adjustment Bevel gear to external handle; 6'-6" to 8'-2" | Net Height Adjustment — | Net Height Adjustment T-handle pull pin |
Official Net Heights Men's 7' 11-5/8", Women's 7' 4-1/8" | Official Net Heights Men's 7' 11-5/8", Women's 7' 4-1/8" | Official Net Heights Men's 7' 11-5/8", Women's 7' 4-1/8" | Official Net Heights Men's 7' 11-5/8", Women's 7' 4-1/8" | Official Net Heights Men's, women's and youth play | Official Net Heights Men's, women's and youth play |
Net Included — | Net Included Cable-less net, 32' x 3'-3", 4 in. #21 nylon mesh | Net Included Cable-less Flex Net (PVBN-6), 32' x 3'-3" | Net Included Cable-less Flex Net (PVBN-6), 32' x 3'-3" | Net Included Premium Competition Net (PVBN-5) | Net Included Premium competition net |
Winch & Pulley PVBWINCH worm gear 10:1; recessed 4 in. pulley | Winch & Pulley Internal worm gear 10:1, folding handle, off-court | Winch & Pulley Worm gear 10:1, steel cover; recessed 4 in. pulley | Winch & Pulley Worm gear 10:1, steel cover; recessed 4 in. pulley | Winch & Pulley Worm drive gearbox winch (PVBWINCH) | Winch & Pulley Worm drive gearbox winch; 4 in. polycarbonate pulley |
Upright Padding — | Upright Padding Thirteen color choices | Upright Padding 2 in. foam, 14 oz vinyl nylon, thirteen colors | Upright Padding 2 in. foam, 14 oz vinyl nylon, thirteen colors | Upright Padding 6 ft. high pads (PVB-60P), optional colors | Upright Padding 6 ft. high pads, optional colors |
Compliance NCAA, NFHS, USVBA compliant | Compliance NCAA, NFHS, USVBA compliant | Compliance NCAA, NFHS, USVBA compliant | Compliance NCAA, NFHS, USVBA compliant | Compliance NFHS, NCAA, USVBA compliant | Compliance NFHS, NCAA, USVBA compliant |
Ship Weight 89 lbs | Ship Weight 109 lbs | Ship Weight 199 lbs | Ship Weight 212 lbs | Ship Weight 77 lbs | Ship Weight 215 lbs |
Best for Facilities that already own nets and pads for 2 in. sleeves. | Best for Schools upgrading uprights and net for 3-1/2 in. sleeves. | Best for Schools needing a complete aluminum package for 3-1/2 in. sleeves. | Best for High schools wanting geared height control with 3-1/2 in. sleeves. | Best for Staff needing ultra-light carbon posts for existing 3-1/2 in. sleeves. | Best for Elite programs wanting the top carbon package for 3-1/2 in. sleeves. |
| $3,799.00 | $5,228.00 | $7,047.00 | $8,544.00 | $9,503.00 | $11,435.00 |
| Viewing | Check › | Check › | Check › | Check › | Check › |
Shipping & Returns
We offer standard 1-5 business day shipping (following dispatch) via LTL Freight, FedEx, UPS, DHL, or USPS. Orders typically process in 1-2 business days (starting the following business day). Shipping rates are usually calculated at checkout; however, we reserve the right to provide custom shipping quotes for oversized or specialized equipment.
60-DAY NO-HASSLE REFUNDS AND RETURNS
If there’s an issue with your product, we make refunds and returns quick and easy.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused or unused, with tags, and in its original packaging. To contact us, email info@joysportstore.com
More information on shipping and returns can be found here.
Warranty
Jaypro Sports (Waterford, Connecticut) warrants its equipment against defects in material and workmanship from the date of shipment. Coverage length depends on the product line — where a specific period is listed above, that period applies to this model. Jaypro warranty periods run as follows:
- Limited Lifetime – glass basketball backboards (GBAFR-48, GBRUB-42, GBRUB-54) against breaks and cracks in the glass when used with a direct goal mount.
- 25 years – structure of wall-mounted basketball backstops and Shooting Station systems.
- 10 years – uprights on FeatherLite, PowerLite and Hybrid Steel volleyball net systems.
- 7 years – Collegiate competition basketball goals (GBA-542 "Shot", GBA-642 "Revolution").
- 5 years – Revolution Series 180° flex basketball goals.
- 3 years – the majority of the catalog: fixed and breakaway basketball goals, aluminum backboards, lacrosse and field hockey goals, floor sleeves, sleeve reducers and floor anchors, referee stands and equipment carriers.
- 1 year – bases, home plates and pitching rubbers, volleyball nets and net accessories (antennas, boundary tape, court lines), batting cage systems and general accessories.
The warranty covers factory defects under normal, intended use. Jaypro will repair, replace or refund the defective item at its discretion; claims require a Return Authorization (RMA) before any item is sent back.
Not covered: normal wear, weather exposure, cosmetic damage that does not affect function, improper installation, use other than intended, and any unauthorized alteration or modification of the original factory configuration. As an authorized Jaypro Sports dealer, JoySportStore files warranty claims directly with the manufacturer on your behalf.