Product Overview
The PKRG20PM package bundles a matched backboard, goal and pad so a court can be specified in one part number. It combines the tall 48" x 72" RG glass backboard, the 2000+ breakaway goal and PMCE padding.
The RG backboard is fabricated with a steel frame of formed steel angles connected with heavy gauge steel mounting brackets to reinforce the corners, powder coated in a durable neutral gray. The glass is 1/2" fully tempered with a white border and target lines permanently fused onto the surface; Gared specifies a nominal thickness range of .485" to .515" and does not accept 12mm glass as a substitute. Vinyl shock absorbing material insulates the glass from the frame, and shock insulating pads sit between the steel goal mounting plate and the glass. Goal mounting holes are on standard 5" horizontal and 5" vertical centers, and the board meets NCAA and high school requirements.
The 2000+ collegiate goal is factory set to deflect at 140 lbs and to a 50% to 52% Fair Court measurement, against an NCAA requirement of 35% to 50%. Gared allows the vertical springs to be adjusted equally in half-turn steps (roughly 1% to 1.5% per full turn) but never more than 1/4" from the original factory position. The backboard carries a lifetime warranty against defects, with glass breakage covered only when a Gared Direct Goal Attachment is used.
Specifications
| Specification | Value |
|---|---|
| Model | PKRG20PM Scholastic Gymnasium Backboard Package |
| SKU | PKRG20PM |
| UPC | 00842299105932 |
| Package Contents | RG 48" x 72" glass backboard, 2000+ breakaway goal, PMCE backboard padding |
| Backboard | Model RG steel frame rectangular glass backboard, 48" x 72" |
| Glass | 1/2" fully tempered (nominal range .485" to .515"); 12mm glass not considered equal |
| Backboard Frame | Formed steel angles fastened together with heavy gauge steel mounting brackets at corners |
| Backboard Finish | Durable neutral gray powder coat on frame, brackets and plates |
| Markings | White border and target lines permanently fused onto the glass surface |
| Glass Protection | Vinyl shock absorbing material between glass and frame; shock insulating pads at goal mounting plate |
| Goal Mounting Holes | Standard 5" horizontal and 5" vertical centers |
| Goal | 2000+ collegiate breakaway goal, factory set to deflect at 140 lbs |
| Compliance | Backboard meets NCAA and high school requirements; goal meets NCAA and NFSHSA specifications |
| Fair Court Setting | Goal preset to 50% to 52% Fair Court measurement (NCAA range 35% to 50%) |
| Country of Origin | United States / China |
| Shipping Weight | 310 lbs / 140.61 kg |
Compare Gared models
|
39WO Fixed |
4066 High Strength |
1000 Flex |
6600 Scholastic |
8800 Endurance |
3500 Master Pro |
|---|---|---|---|---|---|
Model 39WO Stationary Front Mount Goal | Model 4066 High Strength Stationary Rear Mount | Model 1000 Scholastic Flex Breakaway Goal | Model 6600 Scholastic Rear Mount Breakaway Goal | Model 8800 Endurance Break-Away Goal | Model 3500 Master Break-Away Goal |
Goal Type Stationary front-mount goal | Goal Type Stationary rear-mount institutional goal | Goal Type Flex breakaway, two-spring, no positive lock | Goal Type Rear-mount breakaway, double spring flex | Goal Type Breakaway, double spring flex, stack springs | Goal Type Enclosed positive lock breakaway, adjustable |
Ring 18" ring, 5/8" diameter steel | Ring 18" ring, 5/8" diameter | Ring 18" ring, 5/8" diameter steel | Ring 18" ring, 5/8" diameter steel | Ring 18" double ring: 3/4" top, 5/8" lower | Ring 18" ring, 5/8" diameter steel rod |
Deflection / Break Setting — | Deflection / Break Setting — | Deflection / Break Setting Factory set to deflect at 90 lbs | Deflection / Break Setting Factory set to deflect at 90 lbs | Deflection / Break Setting Deflects in degrees with applied pressure | Deflection / Break Setting Preset 40%-44% Fair Court; 31,000-cycle tested |
Brace 7/16" steel brace rod, all-welded | Brace — | Brace Continuous welded full wrap wing brace | Brace Welded wrap-around brace, 3/16" x 1-1/2" | Brace Continuous welded full wrap-around wing brace | Brace Continuous welded full wrap wing brace |
Net Attachment Twelve continuous no-tie attachments | Net Attachment Twelve no-tie holders, continuous ring | Net Attachment Continuous no-tie ring | Net Attachment Continuous no-tie attachments | Net Attachment — | Net Attachment Continuous no-tie tube-tie ring |
Back Plate / Mounting 3/16" thick plate, 6 7/16" x 7"; four 3/8" bolts | Back Plate / Mounting 7-gauge, 6" wide, eight-hole configuration | Back Plate / Mounting Universal mounting plate | Back Plate / Mounting Heavy gauge, 6" wide; 7/16" square holes | Back Plate / Mounting Universal mounting plate | Back Plate / Mounting Universal plate, 5" x 7" |
Backboard Compatibility Most 42", 48" and fan-shaped backboards | Backboard Compatibility Models 1266, 1266B | Backboard Compatibility Most 42"/48" rectangular and fan boards | Backboard Compatibility Models 1266, 1266B | Backboard Compatibility Most 42"/48" rectangular and fan boards | Backboard Compatibility Most 42"/48" rectangular and fan boards |
Certification — | Certification NCAA (except Division I) and NFHS | Certification Meets NCAA and NFHS requirements | Certification NCAA (except Division I) and NFHS | Certification Meets NCAA and high school requirements | Certification NCAA and NFHS; NCAA rim elasticity rule |
Origin China | Origin China | Origin China | Origin China | Origin China | Origin China |
Ship Weight 13 lbs | Ship Weight 13 lbs | Ship Weight | Ship Weight | Ship Weight | Ship Weight |
Best for Recreation centers and playgrounds needing a simple front-mount fixed goal. | Best for Institutions needing a vandal-resistant fixed rear-mount goal. | Best for Schools upgrading to an affordable NFHS-legal flex breakaway goal. | Best for High school gyms needing a rear-mount breakaway goal for 1266 boards. | Best for Heavy-play gyms wanting double-ring breakaway durability and true rebound. | Best for Competition venues demanding cycle-tested positive lock performance. |
| $140.00 $137.98 | $299.00 $215.00 | $327.00 $311.75 | $405.00 $384.12 | $363.00 $344.41 | $450.00 $408.25 |
| Check › | Check › | Check › | Check › | Check › | Check › |
Shipping & Returns
We offer standard 1-5 business day shipping (following dispatch) via LTL Freight, FedEx, UPS, DHL, or USPS. Orders typically process in 1-2 business days (starting the following business day). Shipping rates are usually calculated at checkout; however, we reserve the right to provide custom shipping quotes for oversized or specialized equipment.
60-DAY NO-HASSLE REFUNDS AND RETURNS
If there’s an issue with your product, we make refunds and returns quick and easy.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused or unused, with tags, and in its original packaging. To contact us, email info@joysportstore.com
More information on shipping and returns can be found here.
Warranty
Lifetime Warranty on model RG steel frame glass backboard (glass covered only with Gared Direct Goal Attachment)
Gared Holdings LLC warrants its equipment against defects in material or factory workmanship. Coverage length depends on the product line — this model carries the warranty noted above where listed. Gared's warranty periods run as follows:
- Lifetime - Endurance playground systems: in-ground post, extension arm and bracing components.
- 25 years - Standard Duty and Heavy Duty playground posts (braced gooseneck and adjustable straight post structures).
- 10 years - volleyball uprights on OmniSteel, OmniLite, RallyLine and GoCourt systems, and economy playground posts.
- 5 years - FGP series football goalposts, manual and electric winches, curtain hoists and the SafStop gymnasium structure.
- 4 years - 2500 / 2500I Tournament breakaway goals.
- 3 years - winch assemblies, floor sleeves and cover plates, and regulation volleyball nets.
- 2 years - portable winch winders and selected backboards.
- 1 year - nets, padding, base adapters, height adjusters, badminton and tetherball systems, referee stands and accessories.
The warranty period starts on the date of substantial completion (installation). Defects must be reported to Gared in writing during the warranty period with proof of purchase and the purchase or installation date; Gared will repair or replace the defective equipment at its discretion, with shipping, insurance and installation costs borne by the owner.
Not covered: improper installation, use other than intended, unauthorized alterations or modifications, abuse or misuse, and damage from fire, flood, wind or lightning. Liability is limited to repair or replacement of the defective equipment. As an authorized Gared dealer, JoySportStore files warranty claims directly with the manufacturer on your behalf.